- siding repair
Fast, Reliable Siding Replacement for Atlanta Homes
When your siding is past the point of patching, replacement is the right call. Cracked Hardie boards, warped vinyl, rotting wood, peeling paint that won’t hold another coat: these are the signs your home’s first line of defense is failing, and repair work isn’t going to bring it back.
Revive Exteriors replaces siding across Atlanta and the surrounding West and North Metro communities. We’re a family-owned exterior contractor, James Hardie and LP SmartSide certified, and we’ve spent years protecting Atlanta homes from the heat, humidity, hail, and wind that chew through low-grade siding in under a decade. Older ranch home or recent build, storm damage or just age, the install is the same: flashed, fastened, and sealed the way the manufacturer wrote it, so your warranty stays intact and your home looks finished, not patched.
Start a free instant quote and we’ll walk you through your material options and timeline.
- certifications
Common Siding Damage We Repair
Here are the most common siding problems we see on service calls across Atlanta and West Georgia.
Cracked and Broken Boards
Hail, fallen branches, lawn equipment, even baseballs. All of them leave cracks, chips, and holes in siding panels. Fiber cement and vinyl are both prone to impact fractures, especially in cold weather when materials turn brittle. We remove damaged sections and install matching replacements that blend smoothly with your existing exterior.
Wood Rot and Decay
Georgia's humidity creates ideal conditions for rot, particularly around windows, doors, trim transitions, and anywhere caulking has failed. It usually starts at the bottom edge of boards where water pools, then spreads upward into the sheathing. Our crew cuts back all affected material to solid wood, treats surrounding areas, and installs new boards with proper flashing and moisture barriers.
Storm and Wind Damage
Severe thunderstorms, hail, and straight-line winds can tear siding loose, dent vinyl panels, crack fiber cement, and drive debris into your home's exterior. The tricky part: damage isn't always obvious from the ground. Our free assessment covers all walls, soffits, and trim so nothing gets missed.
Warping, Buckling, and Loose Panels
Vinyl siding expands and contracts with temperature swings. Panels nailed too tightly or installed without proper clearance will buckle, warp, and pull away from the wall over time. We correct the underlying installation issue and resecure panels with the right fastener spacing so the problem doesn't come back.
Water Intrusion and Moisture Damage
When siding joints fail or caulking deteriorates, water finds its way behind the siding where you can't see it. Warning signs include bubbling paint, soft spots in the wall, musty odors, and mold on interior walls. We trace the entry point, repair the siding and flashing, and replace any compromised moisture barrier to stop damage at the source.
Fading, Chalking, and Finish Failure
South- and west-facing walls take the worst UV beating, and years of exposure break down the protective finish on painted and factory-finished siding. Fading might look cosmetic, but it often means the material has lost its coating and is absorbing moisture. We replace affected sections and apply finishes built to handle Georgia sun.
Pest Damage
Woodpeckers, termites, and carpenter bees cause real structural damage to wood and engineered wood siding. More often than not, pest damage points to a moisture problem that drew the insects in the first place. We repair the siding, address the moisture source, and coordinate with your exterminator on treatment.
Request A Quote
Siding Materials We Install
The right siding for your home depends on your budget, your maintenance tolerance, and how long you plan to stay. We install three material lines that perform reliably in the Atlanta climate, and we'll walk you through the trade-offs before you commit.
James Hardie Fiber Cement Siding
Hardie board is the gold standard for the Southeast, and there's a reason it dominates higher-end Atlanta neighborhoods. Fiber cement resists rot, won't melt or warp in the heat, holds factory-baked color for 15 years or longer, and stands up to hail far better than vinyl. As James Hardie certified installers, we follow the manufacturer's specs on every job: correct fastener spacing, proper flashing, baked-on ColorPlus finishes. Plank, shingle, and vertical panel profiles are all available, and Hardie is the right answer for homeowners who want a generational exterior.
LP SmartSide Engineered Wood
LP SmartSide gives you the look and feel of natural wood at a friendlier price than Hardie, with much better rot and termite resistance than traditional cedar or pine. The panels are larger and quicker to install, which means a shorter timeline and lower labor cost. It paints beautifully and stays straight in Atlanta humidity when installed and sealed to LP's specs. We're LP certified, which keeps your warranty in force and gives you a solid middle-tier option between vinyl and fiber cement.
Vinyl Siding
Vinyl is the most affordable replacement material and the lowest maintenance: you don't repaint it, ever. Modern premium vinyl is a different product than the brittle 1990s panels most homeowners think of. Thicker panels, insulated profiles, deeper color saturation, better impact resistance. It's the right call for rental properties, value-conscious replacements, and homes in neighborhoods where vinyl is the dominant look. We'll show you premium lines from established manufacturers, not the bargain-bin product that fails in five years.
Mixed-Material Exteriors
A lot of Atlanta homes look best with a combination: Hardie or LP on the front and high-visibility walls, vinyl on the rear and gable ends. We're happy to design a phased or mixed approach that fits your budget without giving up curb appeal.
Our Siding Replacement Process
Full-home siding replacement is a one- to three-week project depending on house size, material, and weather. Here's how we work.
Free In-Home Assessment & Quote
We walk the home with you, measure every wall, photograph the existing condition, and answer your questions about materials, color, and timeline. You can also start with a free instant quote online before we visit.
Material Selection & Scheduling
We bring physical samples to your home so you can see fiber cement, engineered wood, and vinyl in your actual lighting, then help you pick a color palette that fits your roof, trim, and brick.
Tear-Off & Inspection
Our crew removes the existing siding down to the sheathing, then inspects the wall assembly for moisture damage, rot, and compromised house wrap. If we find problems, we stop and walk you through what we found and what it costs to fix before we keep going. No surprise bills at the end.
Repairs & Installation
We replace damaged sheathing, upgrade the moisture barrier, and flash every opening and transition to manufacturer spec. Shortcuts here kill warranties, so we don't take them. Then panels go up: correct fastener type, spacing, overlap, and caulk, with trim, soffits, and fascia installed or refreshed.
Paint, Cleanup & Walkthrough
Pre-finished products get a touch-up where needed; field-painted products get their finish coats. We clean up the site, walk the home with you, and don't consider the job done until you sign off.
- TESTIMONIALS
At Revive Exteriors, customer satisfaction is our top priority
Why Atlanta Homeowners Choose Revive
There are a lot of siding companies in Atlanta. Most are fine. A few will sell you whatever closes today. What's different about us:
- Family-Owned and Locally Operated. We live in the communities we serve. When something goes wrong on a job, you reach a decision-maker, not a call center. We've spent years building a reputation across West and North Metro Atlanta, and we plan to be here for the next generation of homeowners. That's why we can't afford to do bad work.
- Manufacturer-Certified Installers. Both James Hardie and LP SmartSide require contractors to earn certification before they'll honor full product warranties. Our crews hold both. That's not a sticker on the truck. It's documented training, audited installations, and direct accountability to the manufacturers we represent.
- Honest Scoping, No Upselling. If a repair is the right answer, we'll quote you the repair. We're not paid to talk you into a project that's bigger than it needs to be. Our recommendation matches what we'd do on our own house.
- Free Instant Quote. You can start the conversation online before anyone comes to your house. Get a ballpark number, see whether the project fits your budget, and decide from there.
Siding Replacement Across Metro Atlanta
We replace siding across Atlanta and the surrounding metro, with a particular focus on the communities to the west and south of the city. If you're not sure whether your address falls in our service area, give us a call or start a free quote — we'll let you know in the first conversation.
Frequently Asked Questions
How much does siding replacement cost in Atlanta?
A full-home siding replacement in Atlanta typically runs $15,000 to $50,000 depending on house size, material, and scope. Vinyl is the most affordable. James Hardie sits in the middle to upper range, and complex multi-story homes or premium fiber cement profiles push toward the top. We'll quote your specific project after a free in-home assessment, and we offer financing to spread the cost across monthly payments.
How long does a siding replacement project take?
Most full-home replacements take one to three weeks of on-site work once materials arrive. James Hardie ColorPlus orders typically add 2 to 4 weeks of lead time before installation can begin; LP SmartSide and vinyl orders are usually faster. We'll give you a realistic install window when you sign the proposal, not a best-case promise.
Can I replace just part of my siding?
Yes. Partial replacement makes sense when damage is contained to one or two walls, the rest of the siding still has years of service life, and the material is still available in a matching color. We'll be honest with you if matching old material is going to look obviously patched. Sometimes a full replacement is the better visual outcome even when a partial repair is technically possible.
What's the difference between James Hardie, LP SmartSide, and vinyl?
James Hardie is fiber cement: the most durable, the longest-lasting color, and the highest priced. LP SmartSide is engineered wood: natural look, faster install, mid-range price, strong rot and termite resistance. Vinyl is the most affordable and the lowest maintenance, but it won't match the curb appeal of Hardie or LP on a higher-end home. We'll walk you through the trade-offs with samples in hand before you decide.
Do you offer financing?
Yes. We partner with financing providers so you can spread your siding replacement across monthly payments that work with your budget. We'll go over the options with you during the quote conversation.
Are you licensed and insured?
Yes. Revive Exteriors carries full general liability and workers' compensation insurance, and our crews hold manufacturer certifications from James Hardie and LP SmartSide. We're happy to provide documentation before the project starts.
How do I get started?
Use our free instant quote tool online for a ballpark number, or give us a call to schedule a free in-home assessment. We'll walk the property, talk through your options, and have a written proposal back to you within a few days.
- other services
DOORS AND WINDOWS
Upgrade your home’s comfort, efficiency, and style with expert door and window replacements. We specialize in premium vinyl products installed with precision — no shortcuts, no pressure, just long-term performance you can feel.
- QUICK CONTACT
Contact Us
-
402 Adamson Square, Suite 15, Carrollton, GA 30117
-
770-353-9627770-353-9627
-
info@exteriorsbyrevive.cominfo@exteriorsbyrevive.com
Happy & Repeat customers